ME-BME280 is a Breakout Board featuring a Bosch Sensortec BME280 Temperature, Humidity & Pressure Sensor.
The board has selectable I2C address jumper (solder link GS2), I2C pull-up resistors, 7 pin header 2.54mm, and two mounting holes 3.5mm.
Default setting of the board; single power rail Vdd=Vdd_IO (solder link GS1), pull-ups resistors (R2, R3) 4.7k, protocol selector resistor 0ohm (R1), decoupling capacitors 0.1uF on both power supply pins Vdd & Vdd_IO.
If you connect board to both power rails VDD_IO 1.8V and VDD 3.3V be sure to remove the power rail jumper GS1!
BME280 FEATURES:
-
– Package 2.5 mm x 2.5 mm x 0.93 mm metal lid LGA
-
– Digital interface I2C (up to 3.4 MHz) and SPI (3 and 4 wire, up to 10 MHz)
-
– Supply voltage VDD main supply voltage range: 1.71 V to 3.6 V
-
VDDIO interface voltage range: 1.2 V to 3.6 V
-
– Current consumption 1.8 uA @ 1 Hz humidity and temperature 2.8 uA @ 1 Hz pressure and temperature3.6 uA @ 1 Hz humidity, pressure and temperature 0.1 uA in sleep mode
-
– Operating range -40…+85 C, 0…100 % rel. humidity, 300…1100 hPa
-
– Humidity sensor and pressure sensor can be independently enabled/disabled
ADDITIONAL INFORMATION
-
Weight: 1.25g
-
Dimensions: 24mm x 16mm x 1.6mm
Reviews
Clear filtersThere are no reviews yet.